Insta360 Action Camera and Accessories
GadgetiCloud offers you the best offer of Insta360 Camera and Accessories.
The series, includes the best deal from GadgetiCloud of Insta360 camera and accessories, including but not limited to the lens, mods, protective case, cold shoes, action camera.
Come and see if there are any accessories that can supplement your fascinating photography journey~~~
Insta360 GO 2
Carry Case
Specially designed for GO 2
Keep everything perfectly in place and well-protected.
Everything has its place
Includes an extra compartment for accessories like the Charge Cable and Magnet Pendant.
Compact and durable
Perfect for outdoor shooting, travel, and more!
Specs：
Size：210mm*120mm*55mm*
Color： Grey
Weight：193g
Material： Fabric
Insta360 ONE R Vertical Bumper Case
Insta360 ONE R accessories | Vertical Bumper Case
The Insta360 ONE R Vertical Bumper Case is a vertical protective shell.
It provides a through-hole at the bottom for fixing the selfie stick to the optional vertical battery base and allows you to control all the buttons of the camera in the vertical setting.
Feature
- ONE R & Vertical Battery Base Shell
- Selfie stick through the hole
Designed for ONE R Vertical Battery Base.
The vertical Battery Base is sold separately.
Instructions
1. Install
Remove the Core's Lock Cover and place it into the slot on the Vertical Battery Base.
2. Build ONE R with Vertical Battery Base
3. Buttons should be aligned correctly
4.Insert ONE R
Insert ONE R into the case from the bottom first and then the top.
5. Assembled successfully! Make sure the cameras have been inserted completely before use.
*"The 1/4" mounting point of the Vertical Battery Base and the Vertical Bumper Case should be aligned correctly.
*The Vertical Bumper Case is not designed to be used in extreme action environments or in water. ONE R is not waterproof when built with the Vertical Bumper Case. Please use with caution.
6.拆除
Remove the camera out of the case from the top first and then the bottom.
Please read the product manual in the box before using the Vertical Bumper Case.
Insta360 ONE R Vertical Battery Base
Insta360 ONE R accessories | Vertical Battery Base
Insta360 an R vertical battery base allows you to set up the ONE R camera vertically for a variety of applications, including mounting on the optional ONE R drone mount.
The Core module is installed on the top of the base, and the lens module is installed on the top of the Core. Compatible with all lens modules, including: 360 Mod, 1" Mod and 4K Mod.
The base and Insta360 ONE R camera can be further installed in the vertical bumper shell, which can neatly wrap the entire device.
The vertical battery base provides a 1/4"-20 tripod mount at the bottom, and an optional bumper housing allows access to the threaded mount.
Only when the 360 Mod is installed in the optional ONE R Dive Case for Dual-Lens 360 Mod, the vertical battery base can be used for underwater activities.
Dive Case is a vertical diving case specially designed for this type of setup.
There is a USB Type-C interface on the top of the vertical battery holder to connect to the Core module, and there is a USB Type-C charging interface with a charging indicator on the side.
The side port is only for charging and does not support data transmission or ONE R microphone adapter.
Use with the Insta360 ONE R Drone Mount, Dive Case for Dual-Lens 360 Mod or for vertical handheld shooting.
Max Charging voltage: 4.4V
Rated capacity: 1190mAh
Rated power: 4.58Wh
Note
- Designed for use with the Insta360 ONE R Drone Mount, Dive Case for Dual-Lens 360 Mod, or for vertical handheld shooting. Avoid using it in high-action environments or in water. For select action environments, you can use the Vertical Bumper Caser (sold separately).
- Insta360 ONE R is not waterproof when using the Vertical Battery Base without the Dive Case for Dual- Lens 360 Mod.
- The Vertical Battery Base does not support the Mic Adapter or Transfer Cable. The port is for charging only.
- The Vertical Battery Base works with any Insta360 ONE R Mod, not just the Dual-Lens 360 Mod.
- The USB Type-C Male Port connects to the Core's USE Type C port to deliver power to the Core (Before use, remove the lock cover on the Core).
Insta360 ONE R 4K Wide-Angle Mod
Insta360 ONE R accessories| 4K Wide-Angle Mod
Insta360 ONE R 4K wide-angle module for modular ONE R action camera system.
Main feature
- Interchangeable modules for ONE R system
- Up to UHD 4K60, 4000 x 3000 30 fps
- 4000 x 3000 DNG, JPEG, and original photos
- FlowState image stabilization
- Supports optional 197' diving box
Capture images up to UHD 4K at 60 fps and 4000 x 3000 resolution at 30 fps.
It also shoots DNG, JPEG, and original photos at a resolution of 4000 x 3000 at 4:3 and 4000 x 2250 at 16:9.
。
When the 4K module is paired with the core module, the touch screen real-time view display of the core module can be used as a front or rear lens, allowing you to shoot standard 4K videos as well as selfies and video blog videos.
The 4K mod also has FlowState stabilization, which uses scene detection algorithms to stabilize your shots, so they look more balanced and professional.
Like all other modules, the 4K module is waterproof to 16' when assembled with the core module, battery base and mounting frame, without the need for a waterproof enclosure. For deeper waters, a 197' diving box dedicated to this module can be selected.
Specification
- Focal length: 16.4mm
- Maximum aperture: f/2.8
Record
-
DNG / JPEG / 原始 (4000 x 3000)
-
DNG/JPEG/Raw (4000 x 2250)
-
4000 x 3000 30 fps（100 Mb/s H.264/AVC、H.265/HEVC）
-
3840 x 2160 30/60 fps（100 Mb/s H.264/AVC、H.265/HEVC）
-
2720 x 1530 在 30/60/100 fps（100 Mb/s H.264/AVC、H.265/HEVC）
-
1920 x 1080 在 30/60/120/200 fps（100 Mb/s H.264/AVC、H. 265/HEVC）
General information
- Weight: 0.25 ib
- Size (LxWxH): 6.5 x 3.8 x 2.1"
Insta360 GO 2 Pet Strap Mount
Insta360 GO 2 Accessories | Pet Strap Mount
Capture the world from your pet's perspective | Adjustable, soft, and lightweight | Slot the GO 2 Pivot Stand right into the strap's pocket
RESTOCKING: Product will be back in stock mid-Feb. Accepting pre-orders now.
*It is recommended to fix the mount onto a pet harness or pet's clothing for more stabilized shooting.
Fits Fido and Garfield
Adjust the mount to fit your pet with the velcro strap.
Pet-approved comfort
GO 2, the Pivot Stand and Pet Strap Mount together weigh only 85g（3oz）.
Spec
Material: PU leather and elastic velcro
Color: black
Weight: 31 grams (standalone)
Total length: 51.5 cm (20.3 inches)
Maximum use length: about 45 cm (17.7 inches)
Minimum use length: about 35 cm (13.8 inches)
Compatibility: GO 2 Pivot Stand
Notes
Insta360 GO 2 Pivot Stand
Insta360 GO 2 accessories| Pivot Stand
Insta360 GO 2 Pivot Stand allows you to install the GO 2 action camera on almost any surface, and can also double as a handle, making shooting easier.
You can mount Insta360 GO2 to any surface.
Doubles as a handle.
Main feature
- Adhere to the smooth surface
- Used as a handgrip support
- Rotate to desktop standing mode
- Can be used underwater
*The Pivot Stand can only be stuck to flat surfaces that are dry and clean.
Insta360 GO 2 USB Power Mount
Power directly to GO 2 via USB-C
It includes 1 USB Power Mount, 1 Type-C charging cable and 1 manual.
Power the camera so as not to rely on the GO 2’s built-in battery.
The battery binds like snow in the sun. Or about 20 minutes...
And through the USB Power Mount, you can extend your use time! It is very suitable for you who need to connect the device for a long time.
If you need to use GO 2 to shoot more than 20 minutes of video, or just want to charge the camera without having to place it in the docking station, please use a simple USB Power Mount!
Insta360 GO 2 ND Filter Set
Insta360 GO 2 accessories｜ND Filter Set
Easy screw-in installation
The set contains: 1 ND8, 1 ND16, 1 ND32 and 1 ND64 filter for Insta360 GO 2.
The ND filter designed by Freewell Gear can be attached to Insta360 GO 2.
After installing, you can get a balanced color and contrast, full of the cinematic lenses even in brighter light.
feature
ND8
3 stops
ND16
4 stops
This filter reduces light hitting the sensor by 4 stops. Ideal for bright lighting conditions. This gives you more control over your shutter speed, tackling issues such as the "jello effect".
ND32
5 stops
This filter reduces light hitting the sensor by 5 stops for very bright environments. This gives you more control over your shutter speed, tackling issues such as the "jello effect".
ND64
6 stops
This filter reduces light hitting the sensor by 6 stops for extremely bright lighting conditions. This gives you more control over your shutter speed, tackling issues such as the "jello effect".
Built for Insta360 GO 2
適Made for a variety of tough, bright lighting conditions.
Balanced contrast and color
Cinematic highlights.
高High-quality optical glass
16-layer scratch-resistant coating.
Snug fit
Easy screw-on installation.
Size: 3.11 x 3.07 x 0.91 inch
Insta360 GO 2 Lens Guard
Insta360 GO 2 Action camera accessories | Lens Guard
Specially designed for Insta360 GO 2 sports camera accessories
Designed with hardened glass and an anti-fogging protective coating.
High definition and light transmittance, showing real camera lens color and image quality.
Insta360 GO 2 camera fits accurately and fully covers the camera lens to prevent scratches, dust, oil, and fingerprints on the camera lens.
Guidelines for replacing the lens protector
1. Twist the lens guard counterclockwise to remove it.
2. Twist the lens guard clockwise to secure onto the lens.
Note
- Before use, please make sure that the rubber ring of the lens protection lens and the lens are clean and dry. Be sure to install the lens protector in a clean and dry environment. Any dust or dirt on the lens or lens protector may affect the shooting effect.
- Before using it underwater, be sure to install the GO 2 lens protector. Without the lens protector, GO 2 is not waterproof. Please securely tighten the lens protector to prevent image quality problems.
Insta360 GO 2 Easy Clip
Insta360 GO 2 accessories｜ Easy Clip
The adjustable simple clip design allows you to find a suitable shooting angle, and you can quickly disassemble and assemble in a few seconds.
Adjustable design so you can get the right angle.
Clip-on and off in seconds.
Insert your Insta360 GO 2 camera directly into this simple clip, and then you can clip it on the front or back of your hat or headband, or clip it to various other objects or locations that you find useful. The camera can be tilted in a simple clip so that you can switch the angle anytime and anywhere.
The simple clip is provided with the GO 2 camera package. This simple clip can be purchased separately and used as a spare or replacement.
Brand: Insta360
Product size: length x width x height 3.5 x 3.4 x 1.5 inches
Commodity weight: 0.05 Pounds
Insta360 Go 2 Magnet Pendant
Insta360 Go 2 camera accessories｜Magnet Pendant
Shoot hands free with Go 2 on your shirt！
This magnetic lanyard allows you to hang the Insta360 GO 2 camera around your neck for hands-free operation.
It can replace the lanyard already included in the camera.
Your camera only needs to be magnetically attached to the magnetic lanyard, even if you wear T-shirts and other clothes, you can easily remove it when you want to use the handheld camera.
Note
- Do not use this accessory in high-intensity action scenes.
- If you have a pacemaker, please do not use the Magnet Pendant or Easy Clip due to its magnetism.
Insta360 GO 2 Dive Case
Start your water-based adventures by using
Insta360 GO 2
Dive Case
IPX 8 waterproof to depths of 45 m
Protect your GO 2 action camera on all your water-based adventures
How to use it
1. Open the Case
Push the lock block (1) in the direction shown in the figure. After locking, remove the hook (2).
2. Attach the Anti-Fog Inserts
Attach the anti-fog inserts into the buckle on the backside of the Dive Case door, as shown.
3. Insert the Camera
4. Close the Case
Specs: